Microcement Aqua is designed to create smooth, elegant finishes for swimming pools and submerged areas. It is built to last and protect under constant water exposure.
MCA-015-044
Color — 044 AshNine finishes are rated for permanent water. Custom colors matched on request.Order swatches →
StorageShelf life 8 months unopened from manufacture date. After mixing use within 6 hours; resealed tightly it keeps up to 72 hours
CompositionAcrylic based microcement with fine mineral fillers
Packaging20 L bucket: 10.5 kg dry + 4.6 kg Part B, all included
ApplicationTwo to three layers, sealed after drying
Shipping from Bali to all Indonesia
BeforeAfter
Pool steps refinished in Microcement Aqua — before and after
More information
Key features
—Waterproof formulation that resists constant immersion and helps prevent water penetration
—Chlorine and salt resistance for stability in pool chemicals and saline water
—UV stability to help maintain color and finish under prolonged sun exposure
—Slip resistant finish for safer footing in wet environments
—Seamless application with no joints, helping reduce weak points
—High adhesion to concrete, tiles, and well prepared existing substrates
—Crack resistant performance to better tolerate thermal and structural movement
—Smooth modern aesthetic with customizable colors
—Easy maintenance with a less porous surface that helps reduce algae and dirt build up
—Durable performance under heavy use and fluctuating temperatures
Application methods
—Roll for smooth, seamless coverage
—Trowel for sculptural depth and custom reliefs
Recommended use
—Swimming pools and submerged wet areas
—Water features and outdoor wet zones
—Pool surrounds and outdoor showers
Do not use in
Surfaces that will not be sealed with the specified Topcoat
Guidance
Microcement Aqua is applied in two to three layers with a steel trowel for a smooth, refined finish.
1Sand off any old paint or coating, then wipe the surface clean so no dust is left
2Mix powder with Part B liquid and toner
3Place Fibermesh if using
4Trowel two thin coats
5Seal after drying
6Leave a minimum of 4 to 7 days before refilling the pool
Coverage area
2 kg1.5 m² for 2 coats (1–2 mm)
15 kg9–10 m² for 2 coats (1–2 mm)
Estimated coverage for a two-coat application at 1–2 mm thickness. Actual coverage may vary with surface conditions and technique — always allow an additional margin. Always maintain pool water at the correct pH with a professional; strong acids can damage the finish over time.
