Microcement Extreme is designed to create seamless, refined finishes on a variety of surfaces. It is built for long lasting performance.
MCE-015-044
Color — 044 Ash21 standard finishes. Custom colors matched on request. The 2 kg tester lets you apply a real sample and see the true color in your own light.Order swatches →
StorageShelf life 8 months unopened from manufacture date. After mixing use within 6 hours; resealed tightly it keeps up to 72 hours
CompositionAcrylic based microcement with fine mineral fillers
Packaging20 L bucket: 10.5 kg dry + 4.6 kg Part B, all included
ApplicationTwo layers, steel trowel or roll
Shipping from Bali to all Indonesia
Commercial spaces
Walls & Ceilings
Bathrooms
Kitchens
More information
Key features
—Refines the surface into a velvety, continuous finish with a comforting texture
—Elevates details at corners, reveals, and built in furniture with crisp definition or subtle, undulating curves
—Captures subtle trowel movement beautifully for a premium, architectural finish
—Workable for precision leveling and a uniform micro sheen before sealing
—Ideal for high touch areas where a smooth, seamless feel matters, protected by the specified Topcoat
—Delivers the final seamless statement that defines the timeless microcement look
—Creates a stable base that welcomes color depth and subtle variation
Application methods
—Roll for smooth, seamless coverage
—Trowel for sculptural depth and custom reliefs
Recommended use
—Wet areas with the correct Topcoat
—Interior and exterior walls, ceilings, and furniture
—Floors and walls
—Stairs, counters, and built in furniture
—Retail and hospitality high wear zones
Do not use in
Submerged areas ie: pools
Guidance
Microcement Extreme is applied in two layers with a steel trowel for a smooth, refined finish.
1Prime the surface
2Mix powder with Part B liquid and toner
3Place Fibermesh if using
4Trowel two thin coats
5Seal after drying
Coverage area
2 kg1.5 m² for 2 coats (1–2 mm)
15 kg9–10 m² for 2 coats (1–2 mm)
Estimated coverage for a two-coat application at 1–2 mm thickness. Actual coverage may vary with surface conditions and technique — always allow an additional margin. Coverage may be slightly reduced when applied over Fibermesh.
